LED indicator lights red light blinking on SONY TV are normally found on the lower front of the TV. There may be one or more lights and on newer sets, one light may change color to indicate different conditions or to show that certain features are enabled.
Note : 8 times blink – for certain models, a special reset procedure is needed if the red LED on the front of the TV is blinking 8 times and then repeats. This is a model – specific issue that may be resolved by following these steps (please check the answer to be sure your model is included) .
Also Read:
1) How to fix Sony Smart TV Vertical Lines on Screen
2) How to Screen Mirror from iPad to Sony Bravia Smart tv
3) How to Fix HBO Max Not Working on Sony Bravia Smart tv
4) How to Delete or Uninstall Netflix on LG Smart tv
5) How to Download and install Chrome Browser on Sony Smart tv
If the tv will not respond to the remote or the power button, or if that does not fix issue, unplug the tv. For a projector tv or projector, leave it off for 3 minutes. For other tv’s leave it off for 1 minute. Plug the tv back in and turn it on.
Notes: if the tv is plugged into a power strip or surge protector, remove it from the power strip or
surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
Projector TVs and projectors need to cool down before they will turn on again. You may need to wait several minutes before these will turn back on.
Make sure their is room for air to circulate around the cabinet of the TV.
Turn of the tv and disconnect all connected devices. With all devices disconnected, turn on the TV again and check whether the LED blinks.
If it doesn’t blink, the issue may be in the connected device. If it blink, proceed next solution.
Notes: