Fix Insignia Smart tv Remote Not Working & Remote Sensors?

You have a Insignia smart tv and facing issues with insignia smart tv remote and its not working all of sudden like your power button doesn’t work or volume button etc, then by following below steps you can easily fix insignia smart tv remote not working.

If insignia fire tv remote click wheel not working as well you can fix this in just couple of minutes, let’s see in detail below:

Insgnia smart tv remote not working

Soft Reset

Unplug the TV, waited 30 seconds or so, plugged it back in and the remote worked correctly.

Press and Hold 3 Buttons

Press and hold all three button at a time and you will be up and running.

Hold uturn Arrow button, Three line button, Left Ring button all at the same time for 15 seconds.

Insert New Batteries

If batteries gets drained out, then you need to insert 2 new batteries and then check.

Clean Remote

If insignia tv remote is filled with dust or debris then few buttons will work and few buttons will not work and you need to remote batteries and blow some air and press rmeote buttons in and out fastly and hard, so that if dust is filled or any debris should go away.

After cleaning your remote, go ahead and insert new batteries and check remote.

Reset Insignia Remote

Step 1: Remove the battery from insignia remote.

Step 2: Press and hold power button for 30 seconds

Step 3: Let go power button after 30 seconds and now press every single button on insignia smart tv remote.

If button are stuck by pressing firmly your remote will start working normally.

Step 4: Press firmly each and every button in and out.

Once done insert battery back to Insignia smart tv remote and see if your remote is working or not. If you still face the same issue try the above method for couple of more times.

If your issue is not resolved and still facing issues then try the below method.

Replace Batteries

Insignia smart tv remote batteries may be drained, replace batteries with new ones you will be up and running with Insignia smart tv remote working.

If you still have issue, then remove batteries and press and hold power button for 30 seconds and put batteries in remote and your Insignia smart tv remote will be working fine.

Insignia tv Remote sensor not Working?

If remote sensor are not working then you make sure that all connectors are disconnected and power reset insignia smart tv by pressing and holding power button for 30 seconds and reconnect all power cords and see if everything is working correctly or not.

Why Insignia smart tv remote not working all of sudden?

Sometimes, dust, lotion, anything which gets stuck inside insignia tv remote and may cause issue and your remote will not respond.

What to Do if Insignia tv remote doesn’t work

Remove Batteries->Press and hold power button for 30 seconds-> insert batteries.

Lakshmi Durga
Lakshmi Durgahttps://www.asavvyweb.com
Lakshmi Durga is Senior Content Writer and Author and Also a Senior Editorial Team Member at A Savvy Web for More than 5 Years and She writes about technology related subject troubleshooting guides and helps users to solve issues. She has a Degree of Bachelor of Technology (Btech) from Kakatiya University and (Master of Technology) Mtech at Kakatiya University and JNTU university and is a real time Technology expert. She is a Real time Tech Expert and enthusiastic and has an Expertize in this technology area and writes specially on troubleshooting guides, solutions and tips and fixes and how to articles on Tech Related subjects like iPhone, Android, iOS, Smart tv and other tech related information.

- Advertisement -